User manual
31
2. The port that already set in ring network port, the VLAN port type must Trunk and takes Tag, figure as
5.6.4.
（
Figure 5.6.4
）
8. Typical VLAN Configuration
Suppose switch‘s port 3, 4, 5 satisfied to the requirements as follows: port 3 can intercommunicate with
Port 5, Port 4 can intercommunicate with Port 5, Port 3 can‘s intercommunicate with Port 4, How to set VLAN?
(
Not consider the configuration of other VLAN)
Let‘s
analyse at first,
port 3 can intercommunicate with Port 5, the port must belong to a same member of
VLAN, the same, Port 4 can intercommunicate with Port 5, the port must belong to a same member of VLA,
port 3 and port 4 belongs to different VLAN, figure as 5.6.5
1. Port 3‘s PVID: 2, Port 4‘s PVID: 3, Port 5‘s PVID: 4, port type are both Access.
2. Add VLAN2, VLAN3, VLAN4, the member is 3 and 5, 4 and 5, 3
，
4 and 5. Port type is Untagged.
（
Figure 5.6.5
）
：
IES7110-2GS series VLAN maximum support 64 VLAN item, VID value range:1~4095
Manged port is the port that manage and configure switch, it must in a same VLAN as CPU port
5.6.2 Static filtering
Devices to provide static MAC address forwarding. Static address table in a multicast MAC address