3onedata IES615-1F-2DI User Manual Download Page 55 | Manualshive

Page: 55 / 59

background image

User Manual

51

Click "System File Update"
Choose "Upload Configuration"
Click "Upload"

4. Upgrade Firmware

If you know the IP address of the device, user name and password:

Use IE to login Web interface.
Click "System Management"
Click "System File Update"
Choose "Upgrade Firmware"
Click "Browse" and find the place of uploading the file.
Click "Upgrade"
A suggestion‖ interruption of power is not allowed during uploading‖ , confirm it.

1. Load factory default will result in all status be in factory default settings, the IP could be static IP address
"192.168.1.254".
2. Upload the configuration file, in the new configuration if static IP is not in the same network segment, the website

will not be opened.

3. Use dynamic IP settings, but there is no DHCP server on the network segment, that will result in the relevant part

of the IP will not be updated in the new configuration when upload configuration.

5.14.4 Logout

As shown in Figure 5.14.4, logout functionality for the system interfaces.

(Figure 5.14.4)

System Logout

Click the <OK> button, the interface would be returned to the login screen, configuration does not have
to be changed.

«
...
53
54
55
56
57
...
»

Summary of Contents for IES615-1F-2DI




























































Reviews:

No comments

Related manuals for IES615-1F-2DI

Netlink FRX8000

Brand: Cabletron Systems Pages: 94

MMAC-Plus 9E423-24

Brand: Cabletron Systems Pages: 10

MMAC-Plus 9A128-01

Brand: Cabletron Systems Pages: 22

Spectrum EMM-E6

Brand: Cabletron Systems Pages: 2

SmartSTACK ELS100-24TXG

Brand: Cabletron Systems Pages: 112

Brand: Cabletron Systems Pages: 86

Brand: Cabletron Systems Pages: 54

Cabletron BRIM-F6

Brand: Cabletron Systems Pages: 43

Netlink FRX4000

Brand: Cabletron Systems Pages: 60

CSX200 CyberSWITCH

Brand: Cabletron Systems Pages: 2

Brand: Cabletron Systems Pages: 8

Brand: Cabletron Systems Pages: 4

Brand: Patton electronics Pages: 12

Brand: VCS Pages: 118

Brand: Magnadyne Pages: 8

PBE-5AC-300-ISO

Brand: Ubiquiti Pages: 28

Brand: CyberTAN Pages: 67

Brand: Asante Pages: 150

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands