3onedata IES615-1F-2DI User Manual Download Page 51 | Manualshive

Page: 51 / 59

background image

User Manual

47

(Figure 5.13.1)

Mirror Port

It defines a group of ports which are needed to be monitored. The device collects data from these

ports.

Monitored Port

It defines a group of ports which are used to monitor other ports. The device outputs the data

through these ports.

Watch direction

This parameter indicates the direction of the data. It includes 3 kinds of choices: "All", "Ingress" and
"Egress".

1. This function is not often used. Otherwise other port-based higher management function like RSTP,IGMP
SNOOPING
2. Port mirroring function can only deal with the normal FCS packets. It cannot deal with error data frames.

5.14 Basic settings

5.14.1 Device address

IP Address

IP address is a address of 32 bits length which is assigned to the device on the internet. The IP address
consists of two fields: the network number field (net-id) and the Host ID field (host-id). For can
conveniently manage IP address, IP addresses are divided into five categories. As blow:

Network type Address range Available IP network range

A 0.0.0.0

～

126.255.255.255 1.0.0.0

～

126.0.0.0

B 128.0.0.0

～

191.255.255.255 128.0.0.0

～

191.254.0.0

C 192.0.0.0

～

223.255.255.255 192.0.0.0

～

223.255.254.0

D 224.0.0.0

～

239.255.255.255 Non

E 240.0.0.0

～

246.255.255.255 Non

Others 255.255.255.255 255.255.255.255

A, B, C class address is unicast address; D class address is multicast address; E class address is
reserved to prepare for the future for special purposes.

IP address using dotted decimal.

Each IP address is represented as four decimal integers separated by

decimal points, each integer corresponds to a byte, such as, 10.110.50.101.

Subnet Mask

Mask is corresponding 32 bits number of IP address. Some are 1, the others are 0. These 1 and 0 can
be combined arbitrary in principle, but the first continuous bits are 1 when designing subnet mask. IP
address can be divided into 2 parts by subnet mask: subnet address and host address. 1 in IP address
and subnet corresponds to subnet address, other bits are host address. A type of address corresponding
mask is 255.0.0.0; mask of B type address is 255.255.0.0; mask of C type address is 255.255.255.0.

Default Gateway

«
...
49
50
51
52
53
...
»

Summary of Contents for IES615-1F-2DI




























































Reviews:

No comments

Related manuals for IES615-1F-2DI

Adapter Bracket

Brand: Paradyne Pages: 1

StorTrends 1312-P

Brand: American Megatrends Pages: 2

Brand: BEC Pages: 159

Brand: AIC Pages: 88

Brand: Firetide Pages: 32

Modular Fast Fiber Switch Converter MT-RJ

Brand: Lindy Pages: 3

Brand: Cayman Systems Pages: 170

Brand: Patton electronics Pages: 8

Brand: TP-Link Pages: 17

Brand: RSupport Pages: 5

Brand: Hama Pages: 34

Brand: Jatontec Pages: 13

Brand: Accusys Pages: 12

Brand: Baicells Pages: 38

Brand: Zmotion Pages: 57

BioSense Series

Brand: ZKTeco Pages: 96

Westermo Ibex-RT-330-5G Series

Brand: IBEX Pages: 36

Nvidia Jetson Series

Brand: Aetina Pages: 7

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands