TH-310 Wire Stripper
Wire Insulation OD Range: 0.01 - 0.20 inches (0.25 - 5.0 mm)
Instructions
Warning: Do Not Use on Energized Circuits
Tool Adjustment:
• Set stripping to proper depth. (Forward to
increase, backward to decrease depth).
• Set strip length stop to desired strip
length. (Squeeze sides of strip length stop
to position).
• Set handle tension for desired operation.
Stripping Wire:
• Insert wire all the way to the wire stop.
• Close handles to strip.
• Release handles remove wire.
Stripping Wire:
• Insert wire into cutter.
• Close handles to cut wire.
Stripper Blade
Adjustment
Strip Length Stop
Handle Tension Adjustment
Wire Cutter
