3M SST, Manual, Page: 42 / 90

32 • Ch. 3 Burster Mechanism 75-0302-1450-8, Version 1 SST Transport and Burster Mechanism Manual
Note: The Single Infeed Burster automatically draws up the tickets.
3. Carefully feed the ticket into the ticket infeed slot and into the bottom roller. About 1-20
seconds after the first light sensor (LS 4) is activated and you feel the tickets “kick-back”
when you push them in place, the Burster automatically draws up the tickets.
Warning! Make sure that the ticket is straight. If the ticket is slanted, a ticket jam may
occur.
Note: If the Burster does not draw up tickets, verify that you have SST CPU software 3.6.0 or
greater and that DIP Switches #4 and #5 on DIP Switch Bank S1 of the SST CPU Board
Figure 3.12
Inserting a Ticket into Single-Infeed Burster
Infeed Slot
Bottom Roller
Light Sensor 4
Ticket
Mag Stripe