81
Additional options
Setting up reverberation
Models SE and DL
Setting up reverberation
The Reverb Time screen is used to change or view your reverberation settings.
The steps below outline how to change the parameters. Please review Table 6-1:
“Reverb time set-up options” for an explanation of parameters
.
1. From the start screen, select
Setup
(by using
Arrows
) & press .
2. Select
Options
menu (by using
Arrows
) and press .
3. Select
Reverb Time
(by using
Arrows
) and press .
4. In the
Reverb Time
screen to change the settings, follow below:
•
To change the
Method
field, press to switch between
“
Interrupted
” or “
Impulse
” (when Method is selected).
•
To change the
Averaging
field, press to switch between
“
Measurement
” or “
Ensemble
” (when Averaging is selected).
•
To change the
Threshold
, press . Press to toggle between
“
Auto
” or a “
dB”
level value. To change the
dB
level, press
Arrows
to a specific decibel level is selected (i.e., 80 dB) (when
Threshold is selected).
•
To change the
Measure
field, press to toggle between
“Auto”
or
an
“RT”
value is selected (when Measure is selected). To change,
press
Arrows
to a specific decibel level is selected (i.e., 80
dB) (when Threshold is selected).
•
To change the
Filters
field, press to switch between
“1/1”
or
“1/3”
(when Filters is selected).
Figure 6-3: Reverb Time Setup screen
Reverb Time options
a. Method field
b. Averaging field
c. Threshold field
d. Measure field
e. Filters field
a
b
c
d
e
Summary of Contents for SP-DL-1
