© 3M 2008. All Rights Reserved.
41
3M™ Super Close Projection System
User Controls
Security Enable
On: Choose “On” to enable security verification when turning on
the projector.
Off: Choose “Off” to be able to switch on the projector without
password verification
.
Security Timer
The function can be selected the time (month/day/hour) to set the
number of hours the projector can be used. Once this time has
elapsed you will be requested to enter your password again. (Use
number buttons on remote. To change password, follow change
password security code.)
Change Security Code
■
First Time:
1. Press the to set password.
2. The Password is 4 digits, DEFAULT VALUE is “0000”. (first
time)
3. Use number buttons on the remote to select your password,
and then press “Enter” key to confirm your selection.
Security
