© 3M 2008. All Rights Reserved.
29
3M™ Super Close Projection System
User Controls
Auto Power Off
Set the countdown timer interval. The countdown timer will start
when there is no signal being sent to the projector. Then projector
will automatically power off when the countdown has finished.
(in minutes)
Presentation Timer
Set the countdown timer for presentation (in minutes). After setting
the timer, press “Timer” button on the remote control to start the
function.
In the last minute, the timer will turn red. After the timer is finished,
press “Timer” button on the remote control again to close the image.
Mounting
On: When you choose “On”, the projector turns the image upside
down for ceiling-mounted projection.
Off: The factory default setting.
Rear
On: When you choose “On”, the projector reverses the image so
you can project from behind a translucent screen.
Off: The factory default setting.
Management-2/3
