background image

28

Multifunctional settings

Item

Description

PROGRESSIVE

Using the buttons ▲/▼ switches the progressive mode.

TV 

 FILM 

 TURN OFF

   

• This function performs only at an interlaced signal of a VIDEO 

input, a S-VIDEO input or a COMPONENT VIDEO input of 525i 

(480i) or 625i (576i) signal.  
• When the TV or FILM is selected, the screen image will be crisper. 

The FILM mode is adaptable to the 2-3 Pull-Down system to the 

conversion. But these may cause a certain defect (for example, 

jagged line) of the picture at a quick moving object. In such a case, 

please select the TURN OFF, even though the screen image may 

lose the crisp.

MY MEMORY

Selecting a mode of MY MEMORY using the buttons ▲/▼ and then 

pressing the button ► or the ENTER button performs each function.

LOAD1 

 LOAD2 

 LOAD3 

 LOAD4

SAVE4 

SAVE3 

 SAVE2 

 SAVE1

This projector has 4 numbered memories for adjustment data.  

Performing the LOAD1, LOAD2, LOAD3 or LOAD4 loads the data 

on the memory whose number corresponds with the command’

s number, and adjusts the picture automatically depending on the 

data. 

Performing the SAVE1, SAVE2, SAVE3 or SAVE4 puts the current 

adjustment data on the memory whose number corresponds with 

the command’s number. 

PICTURE Menu (continued)

Summary of Contents for S55 - Digital Projector SVGA LCD





















































Reviews: