Operating QUESTempº 44/46
View
053-664, Rev.C
QUESTempº 44 & 46 models
10
Operating QUESTemp
º
44/46
Use the
Up Arrow
and
Down Arrow keys
to move the marker in the display in
front of the desired mode. Pressing the
I/O Enter key
will select the mode.
View
Displays the measured data but does not log it. If more than one set of sensors is
plugged into the unit, they can be displayed by pressing and releasing the
I/O
ENTER
key. The displayed
sensor set
is shown in the
upper right corner
.
Figure 1-6: Viewing measured data
NOTE:
To return to the menu, hold down the
I/O ENTER
key while a 3, 2, 1
countdown is shown in the lower right corner of the display. Then the menu
screen will appear (see Figure 1-3, page 4 for an example).
Setup
Allows changing temperature units, language, time, date, logging rate, selecting
between Heat Index and Humidex, turning air flow on or off, and setting stay time
parameters.
To Setup parameters do one of the following:
1.
From the main menu, select
Setup
by pressing the
I/O Enter
key.
2.
Use the
Arrow keys
to select an item (listed below).
Temperature
: Celsius, Fahrenheit.
Language
: English, Spanish, French, Italian, German.
Time
: 24 hour clock only.
Date
: Day-month-year format.
Log Rate
: 1, 2, 5, 10, 15, 30, 60 minutes.
Heat Index
(United States),
Humidex
(Canada)
Flow
: On (Q
Tº
46 only), Off with fixed rate. (0.3 m/s is the
recommended value for indoor applications and 2.0 m/s for outdoor
applications)
WET
65.5
º
F
1
DRY
74.0
º
F
View mode
Indicates you are
viewing sensor one
data
Operating
