at least 4.0 cm from your head.
CE Warning:
This equipment can be used in
member states of the European Union once the
corresponding administrative licence is obtained.
DECLARATION OF CONFORMITY
3M Peltor, as manufacturer of the product Lite-Com Pro II , declares that the
said product complies with the essential requirements established in article 3
of the Council of Europe Directive 1999/5/CE, dated 9th March, 1999.
13
While transmitting, always keep the antenna and the radio
Note:
4.0cm
( Note: LPD is only used in Europe)
FCC Warning
：
This device complies with part 15 of the FCC Rules. Operation is subject to the
following two conditions: (1) This device may not cause harmful interference,
and (2) this device must accept any interference received, including
interference that may cause undesired operation. Any Changes or modifications
not expressly approved by the party responsible for compliance could void the
user’s authority to operate the equipment.
Before any station transmits on any channel authorized in the GMRS from an point
(a geographical location) within or over the territorial limits of any area where radio
servicesare regulated by the FCC, the responsible party must obtain a license (a
written authorization from the FCC for a GMRS system .
FCC Radiation Exposure Statement:
This equipment complies with FCC radiation exposure limits set forth for an
uncontrolled environment.
This transmitter must not be co-located or operating in conjunction with any other
antenna or transmitter.
IC Warning:
This device complies with Industry Canada license-exempt RSS standard(s).
Operation is subject to the following two conditions:
(1)This device may not cause interference and (2) this device must accept any
interference, including interference that may cause undesired operation of the
device.
Under Industry Canada regulations, this radio transmitter may only operate using an
antenna of a type and maximum (or lesser) gain approved for the transmitter by
Industry Canada. To reduce potential radio interference to other users, the antenna
type and its gain should be so chosen that, the equivalent isotropically radiated power
(e.i.r.p.) is not more than that necessary for successful communication.
Do not transmit for more than 50% of the total transceiver use time; transmitting
over 50% of the total use time may exceed the limits in accordance to the FCC RF
exposure requirements. Nominal transceiver operation is 5% transmission time,
5% reception time and 90% stand-by time.
