Chapter 2 Setting Up Your M150 FPD Monitor
3M Touch Systems Proprietary Information
21
Using the Standard Controls for the Video Card
In addition to the standard controls on the monitor, each video card has
several controls that let you adjust the display settings. The software and
driver for each video card is unique. In most cases, you adjust these settings
by using a program or utility provided by the manufacturer of the video
card.
For example, you can use the Windows Display Properties control panel to
adjust the desktop area (resolution), color depth, and refresh rate.
Whenever you change these settings or the touch screen calibration, the
image size, position, or shape may change. This behavior is normal. You
can readjust the image using the monitor controls described in Chapter 3 of
this guide.
For more information on adjusting the desktop area (resolution), color
depth, or refresh rate, refer to your video card documentation.
Multimedia Options
The M150 FPD monitor comes with multimedia options built-in. It has a
microphone built into the FPD bezel, speakers installed in the base, and
includes multimedia cables. These cables can be connected from either the
rear of the monitor or in front -- two separate sets of jacks are included.
Figure 5 Multimedia Cables
Note:
When installing the multimedia M150 on an arm-mount, you will lose the
base speakers and must supply your own.
Connecting the Touch Monitor
To connect the M150 FPD monitor:
1.
Turn off your computer. You should always turn off the computer before
connecting or disconnecting any device.
