3M Touch Systems Proprietary Information
13
Setting up the monitor
Testing the monitor
To test that the monitor is working properly:
1.
Turn on the host computer.
2.
Make sure the video image is displayed on the monitor’s display. If it is not
visible, first check to see if the LED on the back of the monitor is flashing
orange-to-green. If not, press the Power button on the back of the monitor
(see Figure 3 on page 16).
3.
If the LED is flashing, the host computer’s operating system has an energy
saver setting that has timed out.
If you do not want the energy saver to be active and the monitor is not in a
location where safety is a concern (see “Safety recommendations” on
page 12), turn off the operating system’s energy saver. With this setting, any
touch to the touch to the touch screen will activate the display and will be
recognized by the controller as a touch.
4.
Make sure the video display is centered on the screen. If it needs centering,
follow instructions for auto adjusting the display on page 16.
If the image is still not satisfactory after auto adjusting, follow instructions
on page 17 for manually adjusting horizontal and vertical display settings.
WARNING
To reduce the risks associated with mechanical function which, if not avoided, could result in
property damage:
!
Do not operate the monitor in conditions outside of the operational specifications.