background image

SECTION 7: LIMITED WARRANTY

Limited Warranty:  

3M Purifi cation Inc. warrants this Product to be free from defects in material and workmanship during normal use for the warranty period set forth below. 

The warranty period commences from the date of purchase. This warranty does not cover failures resulting from abuse, misuse, alteration or damage not caused by 3M Purifi ca-
tion Inc. or failure to follow installation and use instructions. No warranty is given as to the service life of any fi lter cartridge, membrane, or media as it will vary with local water 
conditions and water consumption. 

3M MAKES NO OTHER WARRANTIES OR CONDITIONS, EXPRESS OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, ANY IMPLIED WARRANTY OR CONDITION OF MER-
CHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE OR ANY IMPLIED WARRANTY OR CONDITION ARISING OUT OF A COURSE OF DEALING, CUSTOMER OR USAGE 
OF TRADE.  

If the Product is found defective within the warranty period, your exclusive remedy and 3M Purifi cation Inc.’s sole obligation shall be, at 3M Purifi cation Inc.’s option, to replace 
or repair the Product or refund the purchase price of the Product. This warranty does not cover labor. The remedy stated in this paragraph is Customer’s sole remedy and 3M 
Purifi cation Inc.’s exclusive obligation.

Warranty Period:

•  One (1) year on the entire product unit
•  Five (5) years on the media tank only (does not include internal component parts)
•  Five (5) years on the control valve
•  Five (5) years on salt storage container and components*

Limitation of Liability:

  3M Purifi cation Inc. will not be liable for any loss or damage arising from this 3M Purifi cation Inc. product, whether direct, indirect, special, incidental, or 

consequential, regardless of the legal theory asserted, including warranty, contract, negligence or strict liability.  Some states and countries do not allow the exclusion of limitation 
of incidental or consequential damages, so the above limitation or exclusion may not apply to you.  

Warranty Claims:

To obtain warranty service, call 1-800-222-7880 or mail your request to: 3M Purifi cation Inc., 400 Research Parkway, Meriden, CT 06450.  Proof of purchase (original sales 
receipt) must accompany the warranty claim, along with a complete description of the Product, model number and alleged defect. 

This warranty gives you specifi c legal rights, 

and you may have other rights which may vary from state to state, or country to country.

* Water Softeners only

3M is a trademark of 3M Company.

© 2012 3M Company.  All rights reserved.

INSTR4333 0212

3M Purifi cation Inc.

400 Research Parkway
Meriden, CT 06450
Toll Free: 1.800.222.7880
Worldwide: 203.237.5541
Fax: 203.238.8897
www.3Mfoodservice.com • www.3Mpurifi cation.com

Summary of Contents for CFS101BWF





















Reviews: