3Jtech G2wifi III_USBx4 User Manual Download

Page: 55 / 60

http://www.3jtech.com.tw

http://www.pnpipcameras.com

G2wifi III_USB x 4 User’s Guide

3.4.4 TR-069

Due to the built-in TR-069 function, G2wifi III_USB x 4 will allow the administrator to remotely do the

firmware upgrade, system configuration, management, troubleshooting via the Auto-Configuration

Server (ACS) in the method of HTTP Internet network connection. ACS is a TR-069_based

automatic configuration server, implementing CPE WAN Management Protocol (CWMP). For more

details on the ACS, please refer to our ACS Administrator’s User Manual.

URL of ACS Server:

For G2wifi III_USB x 4’s access of TR-069 service from ACS through the

web browser, please fill in the path in which the ACS is built. For example,

http://61.56.193.38:8080/openacs/acs)

Enable:

Activate/Deactivate G2wifi III_USB x 4’s TR-069 functionality.

Interval Time of Periodic Inform Settings:

Enter a value to set up or change the Periodic

Inform Interval of the G2wifi III_USB x 4. Upon this time interval you had set up, G2wifi III_USB

x 4 will communicate with ACS periodically and automatically. Please note that the value of

Periodic Inform Interval Time

must be more than 30 seconds, and the maximum of this

Interval Time can be 4294967295 in seconds.

Summary of Contents for G2wifi III_USBx4





























































Search results

Summary of Contents for G2wifi III_USBx4

Reviews:

Related manuals for G2wifi III_USBx4

Brands by name

Popular brands

3Jtech G2wifi III_USBx4, User Manual

Search results

Summary of Contents for G2wifi III_USBx4

Reviews:

Related manuals for G2wifi III_USBx4

Brands by name

Popular brands