http://www.3jtech.com.tw
http://www.pnpipcameras.com
G2wifi II User’s Manual
Copyright of 3JTech Co., Ltd. (also doing business as A3J Engineering Inc.)
26
GPRS ISP Settings:
Your GPRS service provider will provide you with the values to fill in for
the required fields of
GPRS Dial Command
,
Username
,
Password
,
Access Point Name
(APN Gateway)
, and the correct
PDP Type
.
GPRS Dial Command:
If your modem supports modem compatibility enter
ATD*99***1#. If your modem does not enter AT+CGDATA=1.
PDP Type:
IP is typically chosen.
Access Point Name (APN Gateway):
This is required.
Local IP Address:
If your service provided a static IP address enter it here. Else
leave it blank or as 0.0.0.0 to get a dynamic IP address using DHCP.
Data Compression:
The default is usually OFF.
Header Compression:
The default is usually OFF.
SIM card PIN code:
SIM card password for authentication.
CDMA Modem Control:
If you are using a CDMA Dialup modem, edit the following
configuration parameters or use the default values.
Maximum Connecting Time:
This is the amount of time that will be waited before ending
a connection attempt.
Maximum Dial Retrys:
This is the number of dialing attempts that will be retried per
connection attempt.
Reconnect Mode:
Typically connections are not always on. The 3Jtech router allows you
to set the reconnection mode. The settings are:
Always on:
A connection to the Internet is always maintained.
On demand:
A connection to the Internet is made as needed.
Maximum Idle Time:
Time interval the machine can be idle before the PSTN connection
is disconnected. The Maximum Idle Time value is only used for the "On demand"
connection mode.
