PANNORAMIC® DESK DW II 3.0.4
SOFTWARE DESCRIPTION
MARCH 30, 2021
34
4.1.2
Exiting the software
To exit the Pannoramic® Scanner 3.0.4 software application, Click
X
at the main window
header to close the program. Note, that when exiting the software, it does not unload the
slide automatically.
4.2
Main window functions
Figure 15 – Pannoramic® Scanner 3.0.4 main window
The following functions are available for you to select from at the main menu bar:
Switch between
Microscope
and
Planner
modes
Microscope initialization
–
All motors and the preview camera during start-up
Brightfield mode
–
The camera set for brightfield scanning is initialized.
Remote server hosting
–
Start and host a live Teleconsultation session.
Load slide
–
If there is no slide loaded into the scanner, this button is displayed. Click
this button to prompt the software to move the stage into loading position. Open the door
of the slide insert, load the slide, then close the door.