3D Systems sPro, User Manual

Page: 88 / 280

SLS p r o c e s s 8 8 B U I L D P A R T S
u s e r ’ s g u i d e m o d i f y i n g a b u i l d i n p r o g r e s s
Adding and Deleting Parts and Other
Changes
Click the Add/Delete Parts button in the Build
Modify dialog (shown on page 87 ) to launch the
Build Setup application. From here you can
modify most aspects of your build packet during
the build.
The application works just as described in the
Build Setup Help, except that it also displays a
plane marking the current Z level. Changes you
make below the plane, such as adding or moving
parts, will not affect the current build, although
they will be saved and will affect future runs of
this build packet. Parts are initially displayed in
Box view.
Running a Prime Cycle
Click the Prime Cycle button in the Build Modify
dialog (shown on page 87 ) to spread powder
across the part bed without moving the part
piston, which can compensate for a short feed.