3D Systems sPro, User Manual

Page: 230 / 280

SLS p r o c e s s 2 3 0 B O S
u s e r ’ s g u i d e u s i n g t h e B O S s e t u p m e n u
SET RCM COM MODE
Use the RCM Com Mode process parameter to set
the BOS/RCM communications mode to LVDS or
SPI .
1
From the Process Params menu, choose RCM
Com Mode , then press .
The currently selected RCM communications
mode appears;
LVDS or SPI .
2
Use to change the mode to LVDS or
SPI .
3
Press to save the mode setting, or press
to keep the setting as-is and return to the
Process Params menu.
SET RCM TYPE
Use the RCM Type process parameter to specify
which type of RCM is connected to the BOS; an
RCM-140 or a (taller) RCM-230.
1
From the Process Params menu, choose RCM
Type , then press .
The currently selected RCM Type appears;
140 or 230 .
2
Use to change the type to 140 or 230 .
Be sure to match the type of RCM actually
connected to the BOS.
3
Press to save the RCM Type setting, or
press to keep the setting as-is and return
to the Process Params menu.
RCM Com Mode
LVDS
RCM Com Mode display
RCM Type
140
RCM Type display