3D Systems PostCure 1050, User Manual, Page: 8 / 68

→
2.6 PostCure 1050 First Aid and Protective Equipment
The following paragraphs provide general first-aid procedures and recommendations for protective equipment to minimize
the risks from material exposure. If professional medical attention is necessary, take the Safety Data Sheet (SDS) for the exact
material involved to the attending physician.
Skin Contact
Printer materials may cause sensitization by skin contact. It is irritating to the skin; repeated and/or prolonged contact may
cause dermatitis. Wear 100% nitrile gloves and lab coats to avoid skin contact. Should material come in contact with skin,
wash thoroughly with soap and COLD water and immediately remove contaminated clothing and shoes. If skin is irritated, get
medical attention. Dry-clean contaminated clothing. Discard contaminated shoes and leather products.
Eye Contact
High vapor concentration may cause irritation. Safety goggles should be worn to prevent accidental splashes of material into
the eyes. If material comes in contact with the eye, flush immediately with large amounts of COLD water for 15 minutes. Avoid
sunlight, fluorescent light, and other ultraviolet light, and obtain immediate medical attention. Eye-wash facilities and a first-aid
kit should be readily available and close to the material.
3D Systems, Inc. 5 p/n 40-D177, Rev. A