59
40-D043 Revision C 5-May-17
M a n u a l O p e r a t i o n s
Leveler
The manual
Leveler
controls the resin level in the RDM through the use of the gross fill and leveling
pumps on the front of the RDM. It also allows for the resin to recirculate.
Move:
Manually
controls the leveling pump (
Turns
unit = pump revolutions).
Fine Level:
Adjusts the resin level to the build start height by using only the leveling bottle and pump.
Recirculate:
When machine is idle, recirculate resin in the RDM; clicking
Recirculate
starts
resin recirculation and changes the button to
Stop Recirculate
.
Clicking
Stop Recirculate
stops the recirculation.
To
Move
the
resin level by a
set distance,
specify the
Turns
and
Velocity
.
Note: If the course level has not been performed first, the leveling bottle
can overflow or continue pumping when empty.
Coarse Level:
Monitors the leveling container status and refills the RDM if resin is low.