54
40-D043 Revision C 5-May-17
M a n u a l O p e r a t i o n s
Elevator
The manual operations
Elevator
allows you to operate the elevator manually. “
”,
and the following textual explanations, show the command’s functions. Be careful when entering
values; if there is a safety limit, observe it. The software tells you to home the recoater, prior to
moving the elevator.
Position:
Shows the current position of the elevator relative to the home
position
The following buttons perform the actions to alter the position.
Stop:
Stops all motion during the move.
To
Move
the Elevator, specify
Distance
and
Velocity
.
UP/DOWN: Moves the elevator up/down by placing the cursor over the intended direction
and pressing and holding the left mouse button
until the intended elevator placement is
achieved, or until the elevator reaches a direction limit.