Introduction
QMS 1725E Print System Operation
1-2
Introduction
This guide will lead you through procedures for installing consum-
ables such as media and toner cartridges. You’ll also find information
on advanced printing features, printer care, print quality, and a trou-
bleshooting section in case something goes wrong. Use this guide in
conjunction with your other QMS 1725E Print System documentation.
This chapter gives you a brief overview of this manual.
About This Guide
The information in this manual is divided into the following sections:
n
Chapter 1—Introduction
Provides an overview of this guide.
n
Chapter 2—Consumables
Describes the paper stocks best suited for your printer; how to
load paper, labels, transparencies, envelopes; and how to
replace the toner cartridge.
n
Chapter 3—Advanced Printing Features
Explains how to print duplex, chain cassettes, collate output, print
a status page, cancel a print job, and end a print job.
n
Chapter 4—Printer Care
Describes how to handle and clean the printer.
n
Chapter 5—Print Quality
Gives information on how to improve print quality through adjust-
ments of print density, gamma correction and printer resolution.
n
Chapter 6—Troubleshooting
Provides media jam prevention tips, explains how to locate and
clear media jams, lists printer status messages, outlines printer
EDNord - Istedgade 37A - 9000 Aalborg - telefon 96333500
