Cancelling/
Ending Print
Jobs
QMS 1725E Print Sytem Operation
3-8
Ending a Print Job
If the first print job in the queue is waiting for, but not receiving the
data it needs to finish printing, the message window displays
WAITING FOR INPUT
END JOB?
Use the following procedure to end all print jobs in the queue that are
waiting for incoming data.
»
Note: This procedure does not end a print job that is still receiving data. Its
only purpose is to provide an end-of-job indicator for a print job that does
not have one. You can identify an end-of-job indicator in the Administration/
Communications/Parallel and Administration/Communications/Serial menu.
(See chapter 4, Printer Configuration, in the Reference guide for more
information). Also see chapter 5, Additional Technical Information, in the
Reference guide for a complete discussion of End Job Mode.
v
Press this
key
to...
The message window
reads...
Cancel
Access the Cancelling Job menu.
CANCELLING JOB?
YES
Next
Advance to the End Job option.
CANCELLING JOB?
END JOB
Cancel
or Select
Select End Job.
END JOB
IS SELECTED
EDNord - Istedgade 37A - 9000 Aalborg - telefon 96333500
