Introduction
QMS 1060 Print System Getting Started
2-2
Introduction
This chapter explains how to set up your QMS 1060 Print System for
the first time.
It includes information on finding a good location for the printer,
unpacking and checking the shipment contents, installing a toner car-
tridge and media cassette, and printing a start-up page.
Finding a Good Location
Your QMS 1060 Print System operates in any computing environment
with the following requirements.
Location Requirements
n
Away from cooling sources, heating sources, extreme tempera-
ture changes, direct sunlight, excessive dust, and corrosive
chemicals or vapors.
n
Away from any strong electromagnetic field (such as that created
by an air conditioner) and excessive vibration.
n
Temperature range of 50° F (10° C) to 95° F (35°C).
n
Relative humidity range of 15% to 85%.
n
Level and capable of supporting the printer weight, which is about
38 lbs (17.25 kg) for the printer only (without the cartridge and
media).
n
An appropriate distance from the host computer, based on your
operating environment—6 feet (1.8 meters) or less for a parallel
connection or 25 feet (7.5 meters) or less for a serial connection.
n
Close to an easily accessible power supply.
n
Well ventilated room.
EDNord - Istedgade 37A - 9000 Aalborg - telefon 96333500
