3Com VCX V7000 Maintenance Manual Download

Page: 306 / 344

306

PPENDIX

D: D

OWNGRADING

VCX S

ERVER

OFTWARE

Note that the downgrade procedure does not remove VCX version 7.1.

software from your VCX system.

Downgrading a

Single-Site System

(7.1.y to 7.1.x)

This procedure describes how to downgrade a pair of VCX servers
running these software configurations:

■

IP Telephony and Messaging

■

IP Telephony only

■

IP Messaging only

Switch VCX Version

To switch the VCX version, perform the steps in this section, first on the
primary server and then on the secondary server.

root

and enter this command:

vcx-switchversion --manual 7.x

Example:

vcx-switchversion --manual 7.1.0c

The

vcx-switchversion

command:

■

Stops VCX services

■

Changes a link to point to the requested VCX version

■

Issues a warning that databases must be restored

CAUTION:

Do not reboot the system or restart VCX services until

databases have been restored. The VCX 7.1.x version has been selected
but the databases still contain 7.1.y versioned data. This combination will
not operate successfully.

Update the pointer to the configuration file using this command:

SetConfigFile /opt/3com/VCX/conf/VCXConfiguration.xml

Stop Database Replication

If the server is running IP Telephony and IP Messaging server software or
IP Telephony server software, you must stop database replication.

CAUTION:

If the server is running IP Messaging server software do not

perform the steps in this section.

Summary of Contents for VCX V7000

























































































































































































































































































































































Search results

Summary of Contents for VCX V7000

Reviews:

Related manuals for VCX V7000

Brands by name

Popular brands

3Com VCX V7000, Maintenance Manual

Search results

Summary of Contents for VCX V7000

Reviews:

Related manuals for VCX V7000

Brands by name

Popular brands