3Com VCX V7000, Installation Manual

Page: 142 / 488

142 C
HAPTER
3: I
NSTALLING AN
IP T
ELEPHONY
S
ERVER
Sample Services Configuration Script — Secondary IP Telephony Server (continued)
In a regional office, IP Messaging can be used in two ways. In a Global
Messaging configuration, the regional IP Messaging servers are used by the
entire organization including branch offices. In a Local Messaging
configuration, the regional IP Messaging servers are used only by the
regional office, and branches have their own IP Messaging systems. NOTE: A
regional office that has no branch offices uses Local Messaging.
Is Global Messaging in use? (Y/N) [N] :
Press the Enter or Return key to accept the default answer (N). Single
offices with two IP Telephony Servers and two IP Messaging Servers are
configured for Local IP Messaging. That is, all users obtain IP Messaging
services from the local IP Messaging Servers.
In order to support "ad-hoc" conferences with more than 3 participants, the
Adhoc Conference Service is used. This service should be enabled on this
server, unless another server dedicated to Adhoc Conferencing will be used
instead. If available, a separate server typically provides greater
capacity and may be shared among sites.
Use the Adhoc service on this server? (Y/N) [Y] :
Press the Enter or Return key to accept the default answer (Y). If you do
not want to use the Adhoc Conference Service, enter
N.
CAUTION: Conferences of more than 6 participants may degrade overall
system performance.
The primary Call Processor has principal responsibility for handling calls.
IP address of the primary Call Processor :
Call Processor tasks are associated with the eth1 network interface. Enter
the IP address of eth1 on the Primary IP Telephony Server.
The primary Authentication & Directory Service is principally responsible
for performing authentication, authorization, and certain user-specific
functions
IP address of the primary Auth & Dir Service :
Authentication and Directory Service tasks are associated with the eth0
network interface. Enter the IP address of eth0 on the Primary IP
Telephony Server.
The primary IP Messaging Service provides voice mail and other messaging
services for the system.