3Com VCX V7000, Installation And Maintenance Manual

Page: 132 / 144

132 A
PPENDIX
B: R
EPLACING A
F
AILED
D
ISK ON A
VCX S
ERVER
UMS Intelligent Mirroring
To restore Intelligent Mirroring for UMS:
1 Transfer the UMS database backup files (that you saved in a previous
step) to the down server.
2 On the down server, restore the UMS database. For instructions, see the
UMS Operations and System Administration Guide.
Check for Oracle Database Replication to Complete
To check the database replication:
1 Log in as cworks .
2 Enter these commands:
cd /opt/3com/VCX/auth/bin
./checkReplication
The script asks for the IP addresses of the two servers and then checks the
replication state of the authentication databases and reports the status.
When replication has been completed, you see this message:
INFO: Multi-Master Replication STATUS:
**************************************
*************** NORMAL ***************
**************************************
On the primary server, restart all VCX services.
1 Log in as root.
2 Enter these commands:
cd /etc/rc.d/rc3.d
./S99vcx start
On the secondary server, restart all VCX services.
1 Log in as root.
2 Enter these commands:
cd /etc/rc.d/rc3.d
./S99vcx start
NOTE: This marks the end of the outage.