3Com VCX V7000, Installation And Maintenance Manual

Page: 127 / 144

Activating Option 184 127
Activating Option
184
To activate option 184, decide whether you want to apply the option to a
specific scope or globally, that is, to all scopes that are served by the
DHCP server software.
To activate option 184 for a specific scope:
1 In the left pane of the DHCP Microsoft Management Console dialog box,
find the scope that you want. Then highlight Scope Options .
2 Right click Scope Options , and, from the menu that appears, select
Configure Options .
The Scope Options dialog box appears.
3 Scroll down in the Available Options list until you find the option that you
just added ( 184 VCX in this example).
4 Enable the check box to the left of the option.
5 Click OK .
In the right pane, the option name now appears in the Option Name
column. The Vendor column contains the word Standard . The values of
the individual elements that you entered appear in the Value column.
The values appear in hexadecimal format although you entered them in
decimal format.
To activate option 184 globally:
1 In the left pane of the DHCP Microsoft Management Console dialog box,
highlight Server Options .
2 Right click Server Options , and from the menu that appears, select
Configure Options . The Server Options dialog box appears.
3 Scroll down in the Available Options list until you find the option that you
just added ( 184 VCX in this example).
4 Enable the check box to the left of the option.
5 Click OK .
In the right pane, the option name now appears in the Option Name
column. The Vendor column contains the word Standard . The values of
the individual elements that you entered appear in the Value column.
The values appear in hexadecimal format although you entered them in
decimal format.