Figure 21
Auxiliary Files Screen (MGCP / MEGACO Gateways)
To save the loaded auxiliary files to flash memory, follow these 2 steps:
1
Click the
Save Configuration
button on the main menu bar; the ‘Save Configuration to
the Flash Memory’ screen is displayed.
Saving an auxiliary file to flash memory may disrupt traffic on the V6100. To
avoid this, disable all traffic on the device before saving to flash memory.
2
Click the
Save
Configuration
button in the middle of the screen; a confirmation
message appears when the save is complete.
A device reset is required to activate a loaded CPT file, and may be required
for the activation of certain
ini
file parameters.
To reset the V6100, follow these 2 steps:
1
Click the
Reset
Device
button on the main menu bar; the ‘Reset’ screen is displayed.
2
Click the
Reset
button in the middle of the screen; the auxiliary files are saved into flash
and the V6100 restarts.
V6100 Digital Gateway Installation Guide
45
