The following Sections from here, up to the end of this Guide, apply equally
to MGCP, MEGACO, H.323 and SIP.
Configuring the Trunk Settings
To configure the trunk settings, follow these 14 steps:
1
Access the Embedded Web Server (see
Accessing the Embedded Web Server
).
2
Open the ‘Trunk Settings’ screen (
Advanced Configuration
menu >
Trunk Settings
);
the ‘Trunk Settings’ screen is displayed.
Initially, the screen appears with the parameters fields grayed (indicating read-only). The
Stop Trunk
button appears at the bottom of the screen.
The Trunk Status indicators appear colored.
shows the possible indicators and
their descriptions.
Figure 9
Trunk Settings Screen
28
V6100 Digital Gateway Installation Guide
