3Com SUPERSTACK 3 3226 Release Notes Download

Page: 1 / 14

Part No. DNA1750-0AAA02
Published April 2004

UPER

TACK

3 S

WITCH

3226

AND

WITCH

3250

OFTWARE

ERSION

1.02 R

ELEASE

OTES

Related Documentation

Please use these notes in conjunction with the following
documents:

■

“

SuperStack 3 Switch 3226 and Switch 3250 Getting

Started Guide

”

Part number: DUA1750-0AAA01
(supplied with your Switch and in PDF format on the
3Com Web site)

■

“

SuperStack 3 Switch 3226 and Switch 3250

Implementation Guide

”

Part number: DUA1750-0BAA01
(supplied in PDF format on the CD-ROM that
accompanies your Switch and on the 3Com Web
site)

■

“

SuperStack 3 Switch 3226 and Switch 3250

Management Quick Reference Guide

”

Part number: DQA1750-0AAA01
(supplied with your Switch and in PDF format on the
3Com Web site)

■

“

SuperStack 3 Switch 3226 and Switch 3250

Management Interface Reference Guide

”

Part number: DHA1750-0AAA01
(supplied in HTML format on the CD-ROM that

accompanies your Switch and on the 3Com Web
site)

You can obtain the latest technical information for your
Switch, including a list of known problems and
solutions, from the 3Com Knowledgebase:

http://knowledgebase.3com.com

Software License Agreement

Before you use the Switch software, please ensure that
you read the license agreement text. You can find the
license.txt file on the CD-ROM that accompanies your
product, or in the self-extracting exe that you have
downloaded from the 3Com Web site.

About this Software Version

This software provides support for the following:

■

Switch 3226 (3CR17500-91)

■

Switch 3250 (3CR17501-91)

The software does not operate on any other 3Com
Switch.

Summary of Contents for SUPERSTACK 3 3226















Search results

Summary of Contents for SUPERSTACK 3 3226

Reviews:

Related manuals for SUPERSTACK 3 3226

Brands by name

Popular brands

3Com SUPERSTACK 3 3226, Release Notes

Search results

Summary of Contents for SUPERSTACK 3 3226

Reviews:

Related manuals for SUPERSTACK 3 3226

Brands by name

Popular brands