manualshive.com logo in svg

3Com Router 3012, Command Reference Manual, Page: 26 / 101

Share
Download
3Com Router 3012 Command Reference Manual Download Page 26

Description

 

Using 

qos policy 

command, you can define a policy and enter map view. Using 

undo 

qos policy

 command, you can delete a policy.

 

The policy cannot be deleted if it is applied on an interface. It is necessary to remove 

application of the policy on the current interface before deleting it via the 

undo qos 

policy

 command.

 

For the related commands, see

 qos class

, 

qos apply policy

.

 

Example

 

Define a policy named 3COM.

 

[3Com]

 qos policy 3Com

 

[3Com-qospolicy-3Com] 

 

1.25  qos reserved-bandwidth 

Syntax

 

qos reserved-bandwidth pct percent

 

undo qos reserved-bandwidth

 

View

 

Interface view

 

Parameter

 

pct percent

: Percentage of reserved bandwidth in available bandwidth, ranging from 1 

to 100. By default, it is 75.

 

Description

 

Using 

qos reserved-bandwidth 

command, you can set the percentage of the 

maximum reserved bandwidth in available bandwidth. Using 

undo qos 

reserved-bandwidth 

command, you can recover the default configuration.

 

While allocating bandwidth for a QoS queue, considering that part of the bandwidth is 

used for controlling protocol packets and L2 header, it is suggested that the 

bandwidth be not larger than 75% of total bandwidth.

 

For the related command, see 

qos max-bandwidth

.

 

3Com Router Command Reference Guide Addendum for V1.2

26

Summary of Contents for Router 3012






































































































Reviews:

No comments