manualshive.com logo in svg

3Com OfficeConnect WX1200, Reference Manual

Share
Download
3Com OfficeConnect WX1200 Reference Manual Download Page 291

Creating and Managing Users in the Local User Database

291

Creating a Named

User

To create a named user:

1

Access the Create Named User wizard:

a

Select the Configuration tool bar option.

b

In the Organizer panel, click the plus sign next to the WX switch. 

c

Click the plus sign next to AAA.

d

Select 

Local User Database

.

e

In the Task List panel, select 

Named User

. 

2

In the Name box, type the name of the user (1 to 60 alphanumeric 
characters, with no spaces or tabs). 

3

In the Password box, type the password for the user (1 to 80 
alphanumeric characters, with no spaces or tabs). You must specify a 
password if you want the password to be encrypted in the configuration 
file.

4

In the User Group list, select a user group to assign the user to, if the 
group is already configured. 

You do not need to assign a user to a user group. If you do select a user 
group, you only need to specify a password for the user. All other 
attributes are obtained from the user group.

5

To set authorization attributes for the user, click 

Next

 and go to step 6. 

6

In the VLAN Name box, select or type the name of the VLAN that the user 
belongs to (1 to 16 alphanumeric characters, with no spaces or tabs). The 
WX switch will authorize the user for that VLAN. For more information on 
VLANs, see “Viewing and Configuring VLANs” on page 208.

If the user requires administrative access only, you do not need to specify 
a VLAN.

Otherwise, if you plan to set authorization attributes in another way, such 
as adding the user to a group or configuring default AAA attribute values 
for the SSID the user will access, click 

Finish

.

7

In the attribute row you want to configure, click the Attribute Value 
column.

See Table 22 on page 295 for a description of user attributes and their 
values.

8

Type the new attribute value in lowercase characters. ACL names are 
case-sensitive. 

Summary of Contents for OfficeConnect WX1200









































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands