3Com MSH 1005, User Manual

Page: 30 / 155

DUA1840-0AAA01
1 - 18 C
H A P T E R
1: G
E T T I N G
S
T A R T E D
Transceiver Module slot
Allows you to install an Transceiver Module. Transceivers available
include:
■
100BASE-TX Transceiver Module (3C18407) — This Fast Ethernet,
100Mbps, twisted pair port provides the Switch with a single,
high-speed connection to, for example, your network infrastructure.
Maximum segment length is 100m (328ft) over grade 5 twisted pair
cable.
■
100BASE-FX Transceiver Module (3C18408) — This Fast Ethernet,
100Mbps, fiber port provides the Switch with a single, high-speed
connection to, for example, your network infrastructure. Use 62.5/125
micron fiber optic cable with SC connectors. The maximum supported
distance is 412m (1352ft) or 2km (6562ft) if the devices at both ends of
the link support full duplex.
■
4 Port 10BASE-T Transceiver Module (3C18409) — Adds an
additional four 10BASE-T ports to your Switch 1005 with the same
operating conditions as the eight fixed ports described below.
You should contact your supplier for further details on these and any
further Transceiver Modules available from 3Com.
10BASE-T Ports
Eight fixed ports each configured as MDIX provide the full 10Mbps
bandwidth to each attached end-station. Maximum segment length is
100m (328ft) over grade 3, 4 or 5 twisted pair cable.