3Com III, Handbook

Page: 176 / 232

Page 168 Setting Preferences for Your Organizer
4. Repeat steps 2 and 3 until the login script is complete.
5. Tap OK.
Deleting a service template
There is only one way to delete a service template: use the Delete
command from the Service menu.
To delete a service template:
1. Tap the Service pick list.
2. Tap the service template you want to delete.
3. Tap the Menu icon .
4. Tap Service, and then tap Delete.
5. Tap OK.
Send User ID Transmits the User ID information entered
in the User ID field of the Network
Preferences screen.
Send
Password Transmits the password entered in the
Password field of the Network Preferences
screen. If you did not enter a password,
this command prompts you to enter one.
The Password command is usually
followed by a Send CR command.
Delay Tells your organizer to wait a specific
number of seconds before executing the
next command in the login script.
Get IP Reads an IP address and uses it as the IP
address for your organizer. This command
is used with SLIP connections.
Prompt
Opens a dialog box and prompts you to
enter text of some kind (for example, a
password or a security code).
End Identifies the last line in the login script.