3Com HomeConnect 3CRWE50194, User Manual

Page: 31 / 61

22 C
HAPTER
5: A
CCESSING THE
I
NTERNET
Figure 11 Setup Page
4 Set your time zone.
From the menu tab on the left side of the page, select
Set Time Zone
. A pull down menu will appear. Press on
the arrows, click your choice, and then click
Enter
.
5 Change your password.
3Com recommends changing your password when
setting up the gateway for the first time. The factory
default username is
admin , and the password is 3com .
When the Change Password page appears, type the
factory default username and password into their
respective text boxes and then your new password in
both the
New Password and Re-enter Password for
Verification text boxes. Click Enter.
Note: Write this password down and keep it in a safe
place, so that you can change your settings in the future.
6 Go to the cable/DSL modem setup.
Select Cable/DSL from the gray menu tab on the left
side of the page. An informational page will appear,
suggesting that you have the modem setting
information from your ISP handy. Collect the
information, and then click
Enter.