3Com CoreBuilder 9000, User Manual

Page: 238 / 468

238 C
HAPTER
9: M
ANAGING
LAN E
MULATION
Enable or Disable LE
Servers Redundancy Enable and disable the LECS-based LANE redundancy facility in the
CoreBuilder 9000 ATM Enterprise Switch. For more information, see
“Redundant LANE Services” on page 392.
Command Actions
Command Result
Example
Enter:
1 1 5 4 2 0
The following message is displayed:
Redundancy mode changed.
The LECS-based LANE redundancy facility in the CoreBuilder 9000 ATM
Enterprise Switch is disabled
.
Enter menu sequence:
(1) SYS: Platform config
(1) SET: Switch setup
(5) SLE: LE setup
(4) RDN: LE Service redundancy setup
(2) LRM: Change LES redundancy Mode
Enter a parameter at the prompt
Parameter Format or Range
Enable/disable
0
to disable
1
to enable
Direct access sequence:
1 1 5 4 2
[parameters]
System action taken: The LECS-based LANE redundancy facility in the
CoreBuilder 9000 ATM Enterprise Switch is enabled or
disabled.
System message display:
Redundancy mode changed.