Modifying VLAN Information
D-7
Modifying VLAN
Information
To modify VLAN information for a traditional bridge:
1
From the top level of the Administration Console, enter:
bridge vlan modify
You are prompted to reenter the information that defines the VLAN.
Press the Return or Enter key to accept any value that appears in
brackets [ ].
2
Enter the slot number for the bridge.
3
Enter the number of the VLAN interface index.
4
Enter the protocol suite for that VLAN:
(IP,IPX,Apple,XNS,
DECnet,SNA,Vines,X.25,NetBIOS,default)
.
5
Enter the VLAN identifier.
6
Enter the VLAN name.
7
Enter the number(s) of the port(s) or
all
.
8
If you have selected the IP protocol suite and want to use the Layer 3
address information, enter
defined
for layer 3 addressing. Enter
undefined
if you do not want layer 3 addressing.
Example:
Select menu option (bridge/vlan):
modify
Select bridge(s) by slot (2-3,5,10-12) [10]:
10
Select VLAN interface [1-2]:
2
Protocol Suite (IP,IPX,Apple,XNS,DECnet,SNA,
Vines,X.25,NetBIOS,default):
IP
Integer VLAN Identifier [1]:
2
VLAN Name [Sales]:
Ports 1=FDDI, 2-17=FastEthernet
Enter port(s) (1-17|all) [1-5]:
Layer 3 Address (undefined,defined) [undefined]:
Top-Level Menu
system
ethernet
fddi
tokenring
➧
bridge
ip
ipx
appletalk
snmp
analyzer
script
logout
display
mode
lowLatency
ipFragmentation
ipxSnapTranslation
trFDDIMode
addressThreshold
agingTime
stpState
stpPriority
stpMaxAge
stpHelloTIme
stpForwardDelay
stpGroupAddress
srBridgeNumber
port
packetFilter
➧
vlan
summary
detail
define
➧
modify
remove
Summary of Contents for CoreBuilder 6000
Page 40: ...34 COREBUILDER 6000 EXTENDED SWITCHING SOFTWARE REVISION 8 2 3 ...
Page 84: ......
