C
AMERA
Q
UICK
R
EFERENCE
The NTSC compliant camera in your Bigpicture
TM
package can be adjusted to
account for a variety of room conditions and settings. The following
instructions provide information on how to adjust the camera, what the
adjustments do, and when to use them.
Manual Focus
An image’s focus is adjusted manually by rotating the black focus ring at the
front end of the camera. An object can be brought into focus anywhere within a
range from directly in front of the lens to an infinite distance from the camera. If a
wide range of focus is desired, focus the camera on an object more than 5 meters
away and it will allow for a sharp image within a range of 0.6 meters to infinity.
NOTE:
When adjusting the focus, be sure not to turn the focus ring counterclockwise so far that it unscrews from
the camera. If exposed, the lenses or internal components of the camera may be scratched or damaged.
Power Switch
The power switch is located on the back of the camera. A green LED on the front
of the camera will remain lit when the camera is switched ON and plugged into
the power jack of the capture card.
