3Com AccessBuilder 500, User Manual, Page: 60 / 124

1-40 C
H A P T E R
1: G
E T T I N G
S
T A R T E D
d If you are routing, edit the Port IP address to set it to
UNNUMBERED
or to a valid IP address for the WAN link.
See Appendix A for more information about using numbered and
unnumbered links.
If you are bridging, leave this field at the default setting.
e If necessary, change any of the other parameters to suit your WAN
link. In most cases the defaults can be used.
f Press [CTRL]+[E] to submit this configuration.
The WAN port is now configured and provided the remote unit’s WAN
port has also been configured, data will be passed across the link.
Enter
SAVE
at the command prompt to permanently store this
configuration in the unit’s memory.
Figure 1-20 Edit WAN Port Screen