Luna
®
G3 BPAP 25A (LG3700) Quick Operation Manual V1.0
1 / 3
Luna
®
G3 BPAP 25A (LG3700) Quick Operation Manual
1.
Button Functions
Home Button: Return to the previous menu or main interface
Knob: Adjust device settings
Start / Stop Button: Start / Stop delivering air
2.
Setting up the Device
C
D
A
B
E
Mask
Tube
Main Device
Power Cord
Power Outlet
Power Adapter
①
②
③
④
①
: Heated Tubing Port
②
: Air Outlet
③
: DC Inlet
④
: Filter Cap (Air Inlet)
A.
Connect one end of the tube to the assembled mask.
B. Connect one end of the tube to the air outlet of the device, as shown in the figure
above. Or connect the heated tubing joint to the air outlet of the device, and then
insert the power plug into the heated tubing port on the back of the device.
C. Connect the power adapter to the DC inlet of the main device.
D. Connect the power cord to the power adapter.
E. Plug the power cord into the power outlet.
3.
Adjusting Device Settings
A. Connect the power cord and power adapter properly, The screen displays the Main
Interface shown in the
figure left below,
press
the Start / Stop Button
,
and the
device will start delivering air, the screen displays the Main Interface shown the
figure
right below.
