INSTRUCTIONS
360 Y-DROP
HAGIE STS 80', 90' & 100' STEEL BOOMS
INTRODUCTION
Before beginning, it’s important to know where each mounting bracket fits relative
to the row spacing involved. The 360 Y-DROP unit should be precisely centered
on the machine, as this is critical to the assembly of the system to the sprayer and
for mounting the system to your sprayer boom. There are, however, many boom
variations among all sprayer models. Your sprayer may not be identical to the model
in the following steps of the guide, and the pictures may not exactly reflect your
model. While these steps will help you install most of your 360 Y-DROP system,
you may need to custom-fit some components with your particular boom.
RECOMMENDED TOOLS
Ratchet wrench with 1/2" and 9/16" deep well sockets
3/8" 12-point socket
1/2" and 9/16" combination wrenches
#2 Phillips screwdriver (for the shield installation)
TORQUE VALUES
Refer to these torque values when tightening all fasteners
5/16" stainless
U-bolt
15 ft/lbs
5/16" stainless
Set screw
15 ft/lbs
3/8" carbon
U-bolt
35 ft/lbs
5/16" carbon
U-bolt
30 ft/lbs
5/16" carbon
Stop bolt
30 ft/lbs
QUESTIONS
Call our Product Support team at 888-512-4890
2
