Centurion Hybrid Installation Manual V2.1.21
Page 22
© 360 Vision Technology Ltd.
• Refresh - Select an automatic page refresh option.
• Camera - Shows information relating to the camera time & date settings, the version of codec and
mainboard software loaded
• Current Status - Shows the camera function information, ie PTZ positions, wiper and lamp activity etc
•
Video Streams - Shows the current video streams configuration.
• Streaming - Shows the IP address on the PC that is receiving the video streams.
• System - Shows how long the camera has been powered, how much bandwidth it is using etc
• Frame Statistics - Gives information about the video stream, how big the frames are, how big the I frames
are, how long it is taking to transmit the frames.
12.2 Settings
12.2.1 Video
The Video page,offers options to setup:-
• Camera - Add or edit the camera name.
• Stream Type - Choice of single or dual video streams.
• CODEC - Choose which compression format, the stream will use.
(See page 38 for table of options).
• Resolution - Set what resolution the stream will use.
(See page 38 for table of options).
Stream Tabs, offer options to:-
•
Framerate - Configure how many frames per second (fps) the stream uses.
(Also see section - Camera - Sensor Frame Rate - page 26).
•
Bit Rate - Set the bit rate that the stream will use. Type in figure in Kbps.
(E.g. 4000Kbps is 4Mbps)
•
Rate Control - Configure the rate control of the stream, choices are VBR (Variable), CBR (Constant),
and CVBR (Constrained Variable, limited to 8Mbps).
Overlay Options
• Date - Selecting this option will show the date as text on the video stream.
(See section - Date/Time - page 28).
• Time - Selecting this option will show the time as text on the video stream.
(See section - Date/Time - page 28).
• Text - Selecting this option will show the selected text on the video stream. Positions available are top
left or right of the image.
• Detailed Info - This will show the information about the stream on the video.
