Affiniti Thermal IP Install Manual V2.1.17.3
Page 17
© 360 Vision Technology Ltd.
When using ‘multicast’ all intermediate network-switches and routers must be set to allow the stream from the
‘new UDP address’ to be routed correctly.
OK
to apply the new settings into the Affiniti Thermal IP.
Cancel
to abandon the changes to the network settings.
5.9 Maintenance
• Camera - Cannot be edited, shows label/name given to the camera.
(See section Video - Camera - page 10).
• Firmware - Current firmware loaded onto the camera.
• Hardware - Current mainboard software loaded onto the camera.
• Storage - Used and free space on the memory device. Used for the firmware update process.
• Format - You can use this option to format the storage device. Please stay on the web page while it is
doing this. Once formatted the Unmount button will show as mount. Use this to mount the device so
that it can be used by the camera.
• Unmount - Select this option to unmount the storage, once you have confirmed this is what you want
to do it will report back that the process is successful.
Event logs
• System Log - Currently not available.
• Access Log - Currently not available.
Camera Log
• Active Connection log - Currently not available.
• Current Parameter log - View - Selecting this option shows the current stream settings.
Save - Allows the current camera stream settings to be copied and then
pasted as a text file.
Clear - Selecting this option will default the Affiniti Thermal IP camera
settings. Admin login details are required to perform this action.
