2Wire HomePortal 4011G Installation And User Manual Download Page 78

Page: 78 / 94

CHAPTER 7: Configuring the Broadband Connection

Changing to the Bridging Mode

Select the

Override the built-in MAC address

button.

Enter the MAC address in the corresponding field.

Click

Save

Changing to the Bridging Mode

By default, the 2Wire Gateway is configured in the routing mode.

Note

When routing is disabled, the NAT and the DHCP server are also disabled. Ensure that
the WAN protocol is compatible to bridging mode, that is, switch PPPoE IP through Bridge
LLC or Bridge VC-Mux before you disable routing.

Open a Web browser and enter

http://home, http://gateway.2Wire.net, or

http://192.168.1.254

to access the gateway user interface.

Click

on the

Home

page; the

Summary Status

page opens.

Summary of Contents for HomePortal 4011G































































































Search results

Summary of Contents for HomePortal 4011G

Reviews:

Related manuals for HomePortal 4011G

Brands by name

Popular brands

2Wire HomePortal 4011G, Installation And User Manual

Search results

Summary of Contents for HomePortal 4011G

Reviews:

Related manuals for HomePortal 4011G

Brands by name

Popular brands