2N® LiftIP 2.0 User Manual
98
/
119
•
•
•
•
•
•
TR069
Use this folder to enable and configure remote device administration via the TR-069 protocol.
TR-069 helps you reliably configure the device parameters, update and back up configuration
and/or upgrade device firmware.
The TR-069 protocol is utilized by the My2N cloud service. Make sure that TR-069 is enabled and
Active profile set to My2N to make the device work with My2N properly. Only then the device will
be able to log in to My2N periodically for configuration.
This function enables the device to be connected to an ACS (Auto Configuration Server) of its
own. In this case, the connection to My2N will be disabled in the device.
My2N / TR069
– enable the My2N / TR-069 service.
Active Profile
– select one of the pre-defined profiles (ACS), or choose a setting of your
own and configure the ACS connection manually.
Next Synchronization in
– display the time period in which the device shall contact a
remote ACS.
Connection State
– display the current ACS connection state or error state description if
necessary.
Communication Status Detail
– server communication error code or TFTP/HTTP status
code.
Connection Test
– test the TR069 connection according to the set profile, see the Active
profile. The test result is displayed in the Connection status.
4.5.5 Syslog
2N
®
LiftIP 2.0
allows you to send system messages to the Syslog server including relevant
information on the device states and processes for recording, analysis and audit. It is
unnecessary to configure this service for common operations.
