2N TELEKOMUNIKACE a.s., www.2n.cz
57/82
Tip
Examples of Commands
Command format if a password is set for the phone number:
or also
kd56ur3c5t sys getinfo, sys reset
kd56ur3c5t sys getinfo
for sending ID data and main unit restart.
sys reset
for
kd56ur3c5t cfg apn1 <internet.t-mobile.cz>,[<LiftGate>,[<>]]
APN1 setting.
Command format if there is no password for the phone number:
resets the main unit configuration defaults
cfg default:
for APN2
apn2 cfg APN2 <internet.t-mobile.cz>,[<LiftGate>,[<>]]
setting.
3.2.10 Power Supply and Battery
The Power Supply and Battery tab helps you complete information on the 2N
®
battery pack state.
LiftGate
timeout (in days) following the battery pack installation
–
Battery life-time alert
after which the battery expiration warning (command) should be sent.
number of days after which the battery expiration
–
Repeat life-time alert
warning should be resent (0 means send just once).
number of days after which a preventive system restart should
–
Periodic restart
be made (0 disables this function).
– time (hours and minutes) when the preventive restart should be
Restart time
performed.
3.2.11 Input and Output Pins
