2N TELEKOMUNIKACE a.s., www.2n.cz
49/82
Server IP – IP address for VPN connection.
Server port – port number for VPN connection.
Protocol – select UDP or TCP (depending on the VPN server setting).
Device – select TUN or TAP (depending on the VPN server setting).
Cipher – select the type of data encoding (depending on the VPN server
setting).
The sets of certificates and keys are required files for VPN connection.
ca.crt – server certificate (obtained from the VPN server administrator).
client.crt – device certificate (generated for each
device).
2N LiftGate
®
client.key – private device key (generated for each
device).
2N LiftGate
®
ta.key – tls-authority key (obtained from the VPN server administrator).
SELECT FILE – for permanent storing of certificates in the device memory.
UPLOAD – upload selected files, certificates and keys to the device.
3.2.6 Firewall
The Firewall tab is used for setting access to
from a selected network. If
2N LiftGate
®
the firewall is inactive, there are no restrictions for the given network; if it is active,
only the accesses defined in the table below are allowed.
