2N Indoor Touch 2.0 User Manual Download Page 74

Page: 74 / 135

2N TELEKOMUNIKACE a.s., www.2n.cz

74/135

4.2.1 Device

The Device section helps you add the

devices,

2N IP intercoms 2N Indoor Touch 2.0

devices and devices registered with the same SIP Proxy server. The

2N Mobile Video

and

devices are detected in the LAN automatically

2N IP intercoms

2N Indoor Touch

via

. The devices that are connected to another LAN need a SIP Proxy

2N IP Mobile

server and have to be added manually. You can combine adding devices from groups

(LAN / Proxy / My2N).

Note

The application does not provide simultaneous SIP Proxy server and 2N

connections. Therefore, the added devices are switched

Mobile Video
too. The SIP Proxy account connection, SIP Proxy device creation and

device adding make these devices saved. Once connected to 2N

, the application remembers these devices and adds them

Mobile Video
to the device list after SIP Proxy reconnection. The added LAN devices
are always visible in the Device menu.

Device Adding

Click the

icon in the right-hand bottom corner of the Device main window to enter

the device adding menu.

LAN Devices

Summary of Contents for Indoor Touch 2.0








































































































































Search results

Summary of Contents for Indoor Touch 2.0

Reviews:

Brands by name

Popular brands

2N Indoor Touch 2.0, User Manual

Search results

Summary of Contents for Indoor Touch 2.0

Reviews:

Brands by name

Popular brands